Hisense V40 firmware or ROM (HLTE229E v10 pac)

$4.00 (or 2 credits)

  • Hisense V40 firmware or ROM – for variant HLTE229E with Android 10
  • Stock firmware/ROM or flash file
  • SPD Flash Tool ready file (pac format)
  • Tested/Approved (kindly report if any issue)
  • For for model: HLTE229E – we are not sure if there are variants for this model
  • File size is 1GB files
  • Malware verified (Avast scanned)
Links: 12 Sales

Buy More Credits

Description

How to flash the Hisense U40 firmware or ROM 

Below are steps you can follow the reload or flash a firmware onto the Hisense V40 aka HLTE229E :

  1. Download the flashtool (SPD_Upgrade_Tool)  from here: https://mega.nz/file/LcoThQKZ#Bb_qdaYWwDvd6wfdBLLhbg_YGuY04L6gr18J4IiUjME  and extract it
  2. Download and install the Spreadtrum driver here: https://mega.nz/file/gPYAQIoZ#kyUqAVFnTS9JGeIruvJwbl5NMAIv3Lr4YIRkE6FVxZQ
  3. Then open up the extracted SPD_Upgrade_Tool or flashtool folder > then double-click the file with a black chip and two green arrows icon
  4. From the running flashtool UI > click on the gear icon on the far left > browse to and load the Hisense V40 pac firmware file by double clicking on it – it can take up to a minute or two
  5. Then click the Play like icon (Start Downloading)
  6. Remove and replace the battery – then connect the Hisense V40 device with volume down held down
  7. The downloading should start with a blue bar – at which stage you can release the volume down key > different partitioned will be flashed and you get a green ‘Passed’ when all is done
  8. At which stage click the Stop icon (Square)
  9. Disconnect and power up the device – remove and replace the battery and then power the Hisense V40 device on as normal
  10. It can take a little longer to boot up after a flash (no more than 5 minutes though).

NB. If you need remote assistance using this file, then you could go here to learn of your options (we charge a minimum of R50 for the service).