Mobicel Rave 8.1 Firmware or ROM (*Pac format)

R30 / $3.00 (or 1 credits)

  • Mobicel Rave compatible firmware, ROM or flash file (SPD device with Android 8.1)
  • Tested/Approved  (Kindly report any issue )
  • SPD Upgrade Tool ready file ( in pac format) – CM2 ROM also included
  • File size 570MB
  • R55 in airtime OR R30/$3 Cash
  • NB. Tested for data connection issue fix
  • NB. ROM is also network unlocked
IMPORTANT NOTES
  • Always verify that the IMEI remained the same after every full firmware reload. Dial *#06# to view it - and repair/restore it if necessary
  • Extract your file(s) with 7zip available here
  • Kindly ignore any internet links/shortcuts inside the extracted folder
  • For ROMs not marked as 'Malware verified :D', install and scan the device with the Android Avast app after flashing. Read more on this here
  • and contact should you need help.
  • Not all files have a flash tool included - but you can request one anytime from here
  • For files not marked as Tested/Approved, kindly take a backup whenever you can
  • Need any other help using the file? Avail free support here
  • Or you may let us help you flash your device (remotely or by mail) from R100. Click here for more info

Links: 53 Sales

Buy More Credits

Description

You need to try and reload the ROM or firmware for one of the following typical reasons

  1. Your Mobicel Rave is hanging on the logo even after a hard reset
  2. Your Mobicel Rave keeps on restarting even after a hard reset
  3. Your Mobicel Rave is on bootloop even after a hard reset
  4. Your Mobicel Rave is infected with malware, adware or virus
  5. Your Mobicel Rave has no internet or data service (like 3G) – this is common after a direct network unlock attempt
  6. Your Mobicel Rave has pop up errors about applications stopping from working.

Below are steps on how you can flash the firmware package onto your Mobicel Rave device using a supported SPD Upgrade Tool

  1. Download and extract the Mobicel Rave
  2. stock firmware achieve
  3. Download and launch the SPD Upgrade Tool
  4. Load the pac file onto the flashtool
  5. Click the Play button to initiate the flashing process
  6. Press Vol- (or Vol+) and connect the device onto the PC via a USB cable white it is off
  7. The flashing should start and lash for few minutes
  8. You get a greed ‘Passed’ text once all is done
  9. The device should then auto boot up – try to turn it on manually if it does not

You can ask form additional assistance on flashing this device by posting you question or request here: http://help.saroms.co.za/